Refrigerated countertop prep unit – A refrigerator drawer is a refrigeration appliance that is installed under the countertop of a kitchen at the cabinet level and next to other appliances, such as a stove or a dishwasher. Whether to replace an independent refrigerator or provide additional cold storage space, you can install a refrigerator drawer on your own, following the manufacturer’s instructions. Refrigerated drawers are appropriate for many different spaces in your kitchen. Some are even classified for outdoor use under a bar or counter in a patio or terrace. The space you choose should be large enough to accommodate the refrigerator cabinet drawer.
It should also be as far as possible from heat sources, such as direct sunlight and cooking, to reduce the stress on its cooling mechanism. Finally, space should be near an electrical outlet with a ground connection. Extension cords are not recommended for plugging refrigerated countertop prep unit drawers. A cooling drawer is held in place by a combination of adjustable leveling legs and brackets. The brackets are fixed to the rear wall of your recess cabinet and to the rear of the cooling drawer, preventing it from tipping forward or moving from side to side. The leveling legs support the cooling box from below, which carries the weight of the appliance and its contents.
The individual sliding drawers in a cooling drawer unit are usually captive in the same case. This means that when the case of refrigeration drawer is installed using brackets, the drawers will also be installed under the countertop. Some drawers include plastic spacers to help organize your food. You can place them in their position during installation or when the refrigerator with food once it has had time to cool to the desired temperature. Before turning on the drawer of your refrigerated countertop prep unit, make sure that your bottom rack is clear. As the compressor works, it will ventilate the air through this grate and into your kitchen.