Making wood countertops – A beautiful and profitable alternative to marble or granite counters is made of wood. Wood countertops can be finished creating a functional accessory, but aesthetically pleasing. If you want to build your own wood countertops, use a hardwood that can stand the test of time. The best material to make countertop are oak, cherry, walnut, mahogany, and teak. Although some of these woods are expensive, they are often less expensive than marble or granite. Measure the space on the counter with a tape measure. Write down the width and depth of the countertop base in a notebook.
Put on a mask against dust and eye protection. Mark the cut lines on the wood with a marker and a ruler. Make the cut lines a few inches larger than the base measurements to create a lip. Cut the wood along the lines marked with a circular saw. Remember the important rule: Measure twice, cut once. In addition, he cut wood to make a splash guard for his making wood countertops. Sand the wood countertop and backsplash with a sander or by hand until smooth. Do not leave splinters of wood. Run the first layer of polyurethane sealing over the counter-top wood and splash guard with a brush. Allow drying according to the manufacturer’s instructions.
Once dry, apply at least one more layer of polyurethane. Place the splash guard against the back edge of the countertop and secure it to the counter-top with a nail gun. The stage of your making wood countertops on top of the base of the cabinet in the kitchen, so it is sitting evenly on the base of the cabinet. Fasten counter-top wood to the base of the cabinet with a nail gun from inside the cabinet; the nails should go through the cabinet structure up on the wooden countertop. Powder the countertop and place the kitchen utensils, decoration and other kitchen utensils of your choice on the newly installed wooden countertop.